Відео

What 3 blade props would work? Do they just press fit onto the motor shaft or something? I'm not seeing screw holes in them. I'm thinking about getting this and graduating to taking the ducts off as an option. Cheers.

C reting?

so you create a model but how do you bind?

Thanks, I really enjoy your videos.

Good follow up video

Muito massa amigo 👍

When you calibrate the sticks, you set your mid point to the LCD, this feels wrong to me. The point of calibration is to ensure the hardware is sync'd to the values. You should mid-point physically with the notches around the gimbal. Then after the calibration they will show true. In the video your left gimbal is low. This may seem petty, but when using high rates, you may get drift back. I'm happy to be wrong. Just a passing thought.

what battery charger are you using to charge these please?

Hello is possible install this brand new gimbals on my first version of tx16s? I have not the mark II

Unfortunately I have only option to change direction but no remapping.

good for boats bikes

I agree! It`s a good year for whoop pilots! I case you wan`t even more POWER and FLIGHTTIME from your Meteor75Pro: BETAFPV LAVA 450/550mah 75C LIPO or GNB 530mah 90C/GNB 550mah 100C and AWG20 MAIN CABLE. It`s a BIG DIFFERENCE! Ask me if you need more infos or watch my video.. Happy flying to all the new whoop pilots out there! Whoop is the way!😃

The CTRL+SHIFT+I isn't working, I tied it on 2 different computers. What can I do ?

With this charger can I plug it into a wall outlet or do I need another battery too be able too use it?

Thank you. I’ve been trying to figure this out for months. Thank you.

Thank you! Nice video!

Maybe this is a stupid question, but why would I use a battery to power a battery charger? Surely you would naturally use mains. There are US and EU adapters but none for UK so I have decided to purchase another

I might look into this. Recently just started flying whoops with the Mob6 2024 and have been having a blast inside. Tried to go outside to have a little more room to practice some acro and the thing was getting blown around too much. How is this outdoors with a gentle breeze?

Agreed -- so much fun - I have the 2S Mobula8 and Meteor85 Walksnail editions, took some tuning to get those right, so it's good to see that the Meteor75 coming out with a good tune - About the Beacon and Beep strengths, just go into Esc Configurator and max them out, as it really helps with finding the Quad -- I know there is a warning about that you could burn out a motors maxing out the beacon strengths , but it's been good for me, and I haven't damaged anything by maxing out these settings.

Quick question. Loved your review and the performance of the 75 Pro looks great, very snappy rolls and pitch. That being said, I have a Mobula 8 and no matter what I do to rates it is very sluggish, not snappy at all. Any thoughts???

Wonderful review Whirly Bloke. I've been considering getting a tiny whoop. I only own two quads, a 7" analog and a 3.5" digital cinewhoop. A tiny whoop would be great for indoor flying when the weather is nasty. I've always been dissuaded by the flexy frames that seem impossible to tune (in my mind anyway 😆) and have only seriously looked at carbon frame designs. This video has got me looking again at these little beasts. Thanks for sharing content that I find interesting, informative, and entertaining. Happy flying amigo. 🫡 🍻

For the last four Years I flew only 3" - 4" quads. Since a few months, I have a Meteor85 and it´s so much fun. I love to discover all the smaller places now. Cheerz!

Why this motor on protek35 need 55A esc?do you fly with 4s or 6s with 35A?

Very good review

I have the hdzero version love it lots of fun

Excellent! Exactly what I’ve been looking for! Wonderful presentation. Very informative. Even Joshua B. recognizes you!!! Thank you!!!

Thanks for the video. I followed it step by step to solve the flipping and it worked. Awesome

I really need help, there is no luac option

I suppose all the batteries should have the same mAH? I have a connector where I can connect 6 1s batteries and into my balance charger, but no balance cord. I have 120mAh and 150 mAh, but I suppose I should not match them? Worst case the 150mAH would just not be 100% charged?

I left mine for like 5 yrs, and tried to charge them now, no one works xD. Also tried to use the charger included for my copter and it started smoking, guess the fuse went! I have a high end Hyperion balance charger from when I used to have rc cars, and realized, "how the heck do I balance the 1s?" I cant even read their current.

щиро дякую 😊

Can 18650 2s (for Google fatshark, balancer port available) be charged with this, which voltage should I choose?

Hello. I am just about to finish almost the same build with moonlight walksnail. Only difference are the motors xing 2207 1800 kv. I am glad that i picked almost the same parts as you and you have also the pid setup here :-) my only question is whether you flashed your esc to bluejay or kept as blheli? Thank you for nice video :-)

Hello @WhirlyBloke, thank you for taking the time to share these important upgrades. Could I please ask as to how you designed the custom alphagel plate? I would not shape my own with a 2mm carbon plate cutout, but wondered if you had a shape file somewhere. Also, I cannot really find the same camolo mount. Could you share the link as to where you got it from?

How the hell do you bind this 🫠.. I’m trying & failing to connect it to my Radiomaster Pocket ..

Does the sc100 cable works in reverse? Meaning can you charge a normal usb type c device using this cable by introducing power from the xt60 end

great video I think you went over all the factor on why the drone flips thank you.

Great tips and very good video

Great tips Whirly Bloke. Thanks for creating content that is informative, interesting, and entertaining. Happy flying amigo. 🫡 🍻

Can it use on hdo2

great video as always! I was wondering if the full module has the 2w hack like the ranger. could you please verify?

good job. does it compatible with ESP32 or Arduino?

Did they ever fix this issue?

hey mate im from the UK too and ive just ordered the pavo20 with crossfire can i just ask you how long it took for yours to be delivered bud? (i used the $30 delivery option)

Hallo , could you please help me ? i want to know howe can i charge the DJI FPV battery on ToolKitRC M6 ..

this is super valuable, thank you. the best tpu ive come accross is made by tinmorry. actually every single filament i tried by this rather cheap brand was a blessing so far.

will it accommodate avatar moonlight vtx?

the lite version doesn't come with the plastic parts, but they are available for printing. Also, I paid around $45 for the lite version.

are you able to provide a kit for the Atem mini Extreme ?